- Competitive shipping rates
- Fast and reliable delivery
- Premium quality
International
Nederland
België
Deutschland
Fiberlogy FIBERFLEX 30D Red
€ 43,95
Fiberlogy FIBERFLEX 30D Red
Fiberlogy FIBERFLEX 30D Red is a highly flexible filament with a Shore hardness of D30.
Fiberlogy FIBERFLEX 30D Beige
Fiberlogy FIBERFLEX 30D Black
Fiberlogy FIBERFLEX 30D Blue
Fiberlogy FIBERFLEX 30D Graphite
Fiberlogy FIBERFLEX 30D Gray
Fiberlogy FIBERFLEX 30D Light Green
Fiberlogy FIBERFLEX 30D Orange
Fiberlogy FIBERFLEX 30D Pink 0.5kg
Fiberlogy FIBERFLEX 30D White
Fiberlogy FIBERFLEX 30D Yellow
- Excellent references
- Fast and reliable delivery
- Free shipping from € 0,-
- Product Description
- All Features
- Data Sheets
- Ask a Question
Fiberlogy FIBERFLEX 30D Red is flexible filament that is softer compared to the Fiberflex 40D. With a hardness of 30D on the Shore scale (comparable to, for example, a shoe sole), you can print very elastically. Printing with a direct drive extruder and at a low speed is highly recommended. Highly suitable for prints that need to be able to bend and can be used for both amateur and professional applications. FIBERFLEX 30D filament can withstand lower temperatures well, is wear-resistant, and has high impact resistance.
Fiberlogy is known for its premium quality filament that meets the highest quality standards and goes beyond other manufacturers. By maintaining a diameter tolerance for flexible filament of 0.05 mm and a roundness tolerance of 0.03 mm, FIBERFLEX 30D distinguishes itself from the rest, allowing you to get the best out of your 3D printer.
Applications
- Mechanics: gaskets, conveyor belts, hinge seals, enclosures, impact protection
- Gadgets: phone cases, pedometer or watch bands, VR glasses
- Household: bumpers, face masks, door stoppers, coasters, anti-slip caps
- Toys: rubber figures, car tires, games, bumpers, airplanes
- Jewelry: bracelets, necklaces, rings, earrings
Tip: To make it easier to remove the print, it is advisable to heat the bed to 110°C
Shore Hardness
Refer to the table below to compare the hardness of 30D. Also useful for comparing with other TPU filaments that work with Shore A.
Check out the flexible filament comparison and see how Fiberlogy Fiberflex 30D stands out.
- Material
- Flexible
- Hardness
- D30
- Color
- Red
- Weight
- 0.85 kg
- Diameter
- 1.75 mm
- Diameter Tolerance
- +/- 0.05 mm
- Roundness Tolerance
- + 0.03 mm
- Print Temperature
- 200-220°C
- Bed Temperature
- 50-70°C
- Coil Outer Diameter
- 200 mm
- Coil Inner Diameter
- 50 mm
- Coil Width
- 88 mm
- Pantone
- P.199C
- EAN Code
- 5902560990867
