- Competitive shipping rates
- Fast and reliable delivery
- Premium quality
International
Nederland
België
Deutschland
Fiberlogy FIBERFLEX 30D Light Green
€ 44,95
Fiberlogy FIBERFLEX 30D Light Green
Fiberlogy FIBERFLEX 30D Light Green is a highly flexible filament with a Shore hardness of D30.
Features
- Material
- Flexible
- Hardness
- D30
- Color
- Light Green
- Weight
- 0.85 kg
- Diameter
- 1.75 mm
- Excellent references
- Fast and reliable delivery
- Free shipping from € 0,-
- Product Description
- All Features
- Data Sheets
- Ask a Question
Fiberlogy FIBERFLEX 30D Light Green is flexible filament that is softer compared to the Fiberflex 40D. With a hardness of 30D on the Shore scale (comparable to, for example, a shoe sole), you can print very elastically. Printing with a direct drive extruder and at low speed is strongly recommended. It is highly suitable for prints that need to be able to bend and can be used for both amateur and professional applications. FIBERFLEX 30D filament can withstand lower temperatures, is wear-resistant, and has high impact strength.
Fiberlogy is known for its premium quality filament that meets the highest quality standards and goes beyond other manufacturers. By maintaining a diameter tolerance for flexible filament of 0.05 mm and a roundness tolerance of 0.03 mm, FIBERFLEX 30D distinguishes itself from the rest and allows you to get the best out of your 3D printer.
Applications
- Mechanics: gaskets, conveyor belts, hinge seals, enclosures, impact protection
- Gadgets: phone cases, pedometer or watch bands, VR glasses
- Household: bumper edges, face masks, door stoppers, coasters, anti-slip caps
- Toys: rubber figures, car tires, games, bumpers, airplanes
- Jewelry: bracelets, necklaces, rings, earrings
Tip: To make it easier to remove the print, it is recommended to heat the bed to 110°C
Shore hardness
Refer to the table below to compare the hardness of 30D. Also useful for comparing with other TPU filaments that use Shore A.
Check out the flexible filament comparison and see how Fiberlogy Fiberflex 30D stands out.
- Material
- Flexible
- Hardness
- D30
- Color
- Light Green
- Weight
- 0.85 kg
- Diameter
- 1.75 mm
- Diameter Tolerance
- +/- 0.05 mm
- Roundness Tolerance
- + 0.03 mm
- Print Temperature
- 200-220°C
- Bed Temperature
- 50-70°C
- Coil Outer Diameter
- 200 mm
- Coil Inner Diameter
- 50 mm
- Coil Width
- 88 mm
- EAN Code
- 5902560990928
